Toyota CH-R Owners Manual / Instrument cluster / Warning lights and indicators
The warning lights and indicators on the instrument cluster and center panel inform the driver of the status of the vehicle's various systems.
For the purpose of explanation, the following illustration displays all warning lights and indicators illuminated.
The units used on the meters and some indicators may differ depending on the target region.
Warning lights
Warning lights inform the driver of malfunctions in the indicated vehicle's systems.
*1: These lights turn on when the engine switch is turned to the "ON" position (vehicles without a smart key system) or IGNITION ON mode (vehicles with a smart key system) to indicate that a system check is being performed.
They will turn off after the engine is started, or after a few seconds.
There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer.
*2: The light comes on to indicate a malfunction.
*3: The light flashes to indicate a malfunction.
Indicators
The indicators inform the driver of the operating state of the vehicle's various systems.
*1: In order to confirm operation, the BSM outside rear view mirror indicators illuminate in the following situations:
- When the engine switch is turned to the "ON" position (vehicles without a smart key system) or IGNITION ON mode (vehicles with a smart key system), the BSM function is enabled on the
screen of the multi-information display. - When the BSM function is enabled on the screen of the multi-information display, the engine switch is turned to the "ON" position (vehicles without a smart key system) or IGNITION ON mode (vehicles with a smart key system).
screen of the multi-information display.
screen of the multi-information display, the engine switch is turned to the "ON" position (vehicles without a smart key system) or IGNITION ON mode (vehicles with a smart key system).If the system is functioning correctly, the BSM outside rear view mirror indicators will turn off after a few seconds.
If the BSM outside rear view mirror indicators do not illuminate or do not turn off, there may be a malfunction in the system.
If this occurs, have the vehicle inspected by your Toyota dealer.
*2: These lights turn on when the engine switch is turned to the "ON" position (vehicles without a smart key system) or IGNITION ON mode (vehicles with a smart key system) to indicate that a system check is being performed.
They will turn off after the engine is started, or after a few seconds.
There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer.
*3: The light flashes to indicate that the system is operating.
*4: The light turns on when the system is off.
Indicators and symbols displayed on the multi-information display
*: These lights turn on when the engine switch is turned to the "ON" position (vehicles without a smart key system) or IGNITION ON mode (vehicles with a smart key system) to indicate that a system check is being performed.
They will turn off after the engine is started, or after a few seconds.
There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer.
■Eco Driving Indicator Light
During Eco-Friendly acceleration (Eco driving), Eco Driving Indicator Light will turn on. When the acceleration exceeds Zone of Eco driving, and when the vehicle is stopped, the light turns off.
Eco Driving Indicator Light availability can be customized. The default setting is on.
Eco Driving Indicator Light will not operate in the following conditions:
- The shift lever is in anything other than D.
- The vehicle is being driven in "SPORT" mode
- The vehicle speed is approximately 80 mph (130 km/h) or higher.
WARNING
■If a safety system warning light does not come on Should a safety system light such as ABS and SRS airbag warning light not come on when you start the engine, this could mean that these systems are not available to help protect you in an accident, which could result in death or serious injury. Have the vehicle inspected by your Toyota dealer.
Instrument cluster
...
Gauges and meters
The units used on the speedometer may differ depending on the target region.TachometerDisplays the engine speed in revolutions per minute.Multi-information displayPresents the driver ...
Other materials:
Toyota CH-R Service Manual > Window Defogger System: Parts Location
PARTS LOCATIONILLUSTRATION*1DEF RELAY*2BACK DOOR GLASS (REAR WINDOW DEFOGGER WIRE)*3NO. 1 ENGINE ROOM RELAY BLOCK*4DEF FUSEILLUSTRATION*Afor TMMT Made ...
Toyota CH-R Service Manual > Steering Heater Switch: Inspection
INSPECTIONPROCEDURE1. INSPECT STEERING HEATER SWITCH(a) Check the resistance.(1) Measure the resistance according to the value(s) in the table below.Standard Resistance: Tester ConnectionSwitch ConditionSpecified Conditi ...
